Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Nakayama, Yuta*; Ogawa, Fumio*; Hiyoshi, Noritake*; Hashidate, Ryuta; Wakai, Takashi; Ito, Takamoto*
ISIJ International, 61(8), p.2299 - 2304, 2021/08
Times Cited Count：4 Percentile：33.99(Metallurgy & Metallurgical Engineering)This study discusses the creep-fatigue strength for Mod.9Cr-1Mo steel at a high temperature under multiaxial loading. A low-cycle fatigue tests in various strain waveforms were performed with a hollow cylindrical specimen. The low cycle fatigue test was conducted under a proportional loading with a fixed axial strain and a non-proportional loading with a 90-degree phase difference between axial and shear strains. The low cycle fatigue tests at different strain rates and the creep-fatigue tests at different holding times were also conducted to discuss the effects of stress relaxation and strain holding on the failure life. In this study, two types of multiaxial creep-fatigue life evaluation methods were proposed: the first method is to calculate the strain range using Manson's universal slope method with considering a non-proportional loading factor and creep damage; the second method is to calculate the fatigue damage by considering the non-proportional loading factor using the linear damage law and to calculate the creep damage from the improved ductility exhaustion law. The accuracy of the evaluation methods is much better than that of the methods used in the evaluation of actual machines such as time fraction rule.
Onizawa, Takashi; Hashidate, Ryuta
Mechanical Engineering Journal (Internet), 6(1), p.18-00477_1 - 18-00477_15, 2019/02
Aiming at enhancing its economic competitiveness and reducing radioactive waste, JAEA has proposed an attractive plant concept and made great efforts to demonstrate the applicability of some innovative technologies to the plant. One of the most practical means is to extend the design life to 60 years. Accordingly, the material strength standards set by JSME have to be extended from 300,000 to 500,000 hours but this extension requires more precise estimation of creep rupture strength and creep strain of the materials in the long term. This paper describes the development of creep property equations of 316FR stainless steel and Mod.9Cr-1Mo steel considering changes in creep mechanisms at high temperatures in the long term based on evaluations of long-term creep properties of the materials. The creep property equations developed in this study will provide more precise estimation of the creep properties in the long term than the present creep property equations of JSME.
Asayama, Tai; Otsuka, Satoshi
Proceedings of International Conference on Fast Reactors and Related Fuel Cycles; Next Generation Nuclear Systems for Sustainable Development (FR-17) (USB Flash Drive), 15 Pages, 2017/06
This paper summarizes ongoing efforts in Japan Atomic Energy Agency on the development of core and structural materials for sodium-cooled fast reactors. For core materials, oxide dispersion strengthened (ODS) steels and 11Cr ferritic steel (PNC-FMS) will be used for the fuel pin cladding and wrapper tube, respectively. As for ODS steel, 9Cr- and 11Cr-ODS steels have been extensively developed. Their laboratory-scale manufacturing technology has been developed including reliability improvement in tube microstructure and strength homogeneity. As for the PNC-FMS wrapper tube, the development of a dissimilar joining technique with type 316 steel and properties evaluation of dissimilar welds have been carried out. For structural materials, codification of 316FR stainless steel and Modified 9Cr-1Mo steel is ongoing. Acquisition and collection of long-term data of base metal and welded joints are continued and evaluation methodologies are being developed to establish a technical basis for 60-year design.
Shimomura, Kenta; Kato, Shoichi; Wakai, Takashi; Ando, Masanori; Hirose, Yuichi*; Sato, Kenichiro*
Proceedings of 23rd International Conference on Nuclear Engineering (ICONE-23) (DVD-ROM), 9 Pages, 2015/05
This paper describes experimental and analytical works to confirm that the design standard for SFR components sufficiently covers possible failure mechanisms. Creep-fatigue damage evaluation method in JSME design standard for SFR components has been constructed based on experiments and/or numerical analyses of conventional austenitic stainless steels, such as 304SS. Since the material characteristics of Mod.9Cr-1Mo steel are substantially different from those of austenitic stainless steels, it is required to verify the applicability of the design standards to the SFR components made of Mod.9Cr-1Mo steel. A series of uni-axial creep-fatigue tests were conducted using double-ended notch bar specimens made of Mod.9Cr-1Mo steel under displacement controlled condition with 30 minute holding. The curvature radii of the specimens were 1.6mm, 11.2mm and 40.0mm. The specimen having 1.6mm notch and 11.2mm notch failed from outer surface but the specimen having 40.0mm notch showed obvious internal crack nucleation. In addition, though total duration time of the creep-fatigue test was only 2,000 hours, a lot of creep voids and inter granular crack growth were observed. To clarify the cause of such peculiar failure, some additional experiments were performed, as well as some numerical analyses. We could point out that such a peculiar failure aspect might result from corresponding stress distribution in the cross section. As a result of a series of investigations, possible causes of such peculiar failure could be narrowed down. A future investigation plan was proposed to clarify the most significant cause.
